Publications:

1.        “Large deformations under vertical edge loads of annular membranes with various strain energy densities”, Int. J. Non-Lin. Mech., 21, 257-267, 1986

 2.        “Rubber-like spherical shells under vertical point-loads,” Developments in Theoretical and Applied Mechanics, Volume XIV, pp.342-349, 1988

 3.        “AC magnetic field frequency dependence of magnetoacoustic emissions,” IEEE Trans. Ultrasonics Symposium., Oct. 1992

 4.        “Multi-mode excitation and data reduction for fatigue crack characterization in conducting plates,” IEEE Ultrasonics Symposium., Oct. 1992

 5.        “Quality factor and microslipping of fatigue cracks in thin plates at resonant vibration,” IEEE Ultrasonics Symposium., Oct. 1992

 6.        “Quantitative analysis of a class of subsurface cracks using shearography and finite element modeling,” Review of Progress in QNDE, Vol. 12A, (Plenum Press, New York, 1993), p.403

 7.        “Practical estimates of the errors associated with the governing shearography equation,” Review of Progress in QNDE, Vol. 12A, (Plenum Press, New York, 1993), p.427

 8.        “Analysis of the mutual inductance between two parallel plates for the detection of surface flaws,” Review of Progress in QNDE, Vol. 12A, (Plenum Press, New York, 1993), p.1071

 9.        “Characterization of asymmetry in magnetoacoustic emission  burst by numerical processes,” Review of Progress in QNDE, Vol. 12B, (Plenum Press, New York, 1993), p.1855

 10.     “Finite element modeling of the bulk magnetization of railroad wheels to improve test conditions for magnetoacoustic residual stress measurements,” Review of Progress in QNDE, Vol. 12B, (Plenum Press, New York, 1993), p.1863

 11.     “Fatigue crack characterization in conducting sheets by non-contact stimulation of resonant modes,” Review of Progress in QNDE, Vol. 12B, (Plenum Press, New York, 1993), p.2145

 12.     “Self-nulling eddy current probe for surface and subsurface flaw detection,” Materials Evaluation, Vol. 52/Number 1 (January 1994)

 13.     “Corrosion detection in airframes using a flux-focusing eddy current probe,” Proceedings of ASNT Spring Conference, 34, 1994

 14.     “Study of the new eddy current nondestructive testing sensor on ferromagnetic materials,” IEEE Trans. Mag., Nov. 1994

 15.     “ Characteristics of ferromagnetic flux focusing lens in the development of surface/subsurface flaw detector,” Review of Progress in QNDE, Vol. 13B, (Plenum Press, New York, 1994), p.1785

 16.     “New eddy current probe for thickness gauging of conductive materials ,” Review of Progress in QNDE, Vol. 13B, (Plenum Press, New York, 1994), p.1611

 17.     “An application of a new electromagnetic sensor for real-time monitoring of fatigue crack growth in thin metal plates,” Review of Progress in QNDE, Vol. 13, (Plenum Press, New York, 1994)

 18.     “A probabilistic model for simulating magnetoacoustic emission responses in ferromagnets,” Review of Progress in QNDE, Vol. 13, (Plenum Press, New York, 1994)

 19.     “Characterization of asymmetry in magnetoacoustic emission burs by numerical processes,” Review of Progress in QNDE, Vol. 13, (Plenum Press, New York, 1994)

 20.     “Mutual inductance problem of a system consisting of a current sheet and a thin metal plate,” Review of Progress in QNDE, Vol. 13, (Plenum Press, New York, 1994)

 21.     “,” Review of Progress in QNDE, Vol. 14A, (Plenum Press, New York, 1995), p.291

 22.     “,” Review of Progress in QNDE, Vol. 14B, (Plenum Press, New York, 1995), p.2317

 23.     “Using the thermoelectric effect for weld characterization,” Review of Progress in QNDE, Vol. 14B, (Plenum Press, New York, 1995)

 24.     “A new electromagnetic technique for quantifying material loss in aircraft lapjoints,” Review of Progress in QNDE, Vol. 15A, (Plenum Press, New York, 1996), p.417

 25.     “Magneto-optic image classification using neural networks,” Review of Progress in QNDE, Vol. 15A, (Plenum Press, New York, 1996), p.891

 26.     “Development and testing of rotating probe method for airframe rivet inspection,” Review of Progress in QNDE, Vol. 15B, (Plenum Press, New York, 1996), p.2133

 27.     “Optimizing the design of multilayer eddy current probes a theoretical and experimental study,” Review of Progress in QNDE, Vol. 16A, (Plenum Press, New York, 1997), p.973

 28.     “Characteristics of frequency domain spectrum of self-nulling eddy current probe output,” Review of Progress in QNDE, Vol. 16A, (Plenum Press, New York, 1997), p.997

 29.     “Development of a hand-held, flexible eddy current probe for inspection of curving surfaces,” Review of Progress in QNDE, Vol. 16B, (Plenum Press, New York, 1997), p.2107

 30.     “Theoretical aspects of transient electromagnetic field in finite sized conducting media,” Review of Progress in QNDE, Vol. 17A, (Plenum Press, New York, 1998), p.267

 31.     “Recent advances and implementations of flexible eddy current probe technology,” Review of Progress in QNDE, Vol. 17B, (Plenum Press, New York, 1998), p.1809

32.  “Watt Cost for High Density Cooling? A Cost Study of the Traditional Hot-Aisle/Cold-Aisle Heat Dissipation Methods Versus Active and Water Cooled Enclosure Solutions,” 7X24 Conference Proceedings, Scottsdale Arizona, October 2006.

33.    “Control of Server Inlet Temperatures in Data Centers: A Long Overdue Strategy,” White Paper for AFCO Systems Inc., March 2007.

 34.     “Using the Scientific Method to Motivate Biology Students to Study Precalculus,” PRIMUS, February 2008

 35.     “Going Green Through Measurement and Control,” AERTC 2008 Advanced Energy Conference, Hauppague NY, November 2008.  

 36.    “A New Approach for the Liberal Arts Mathematics Courses,” MathFest 2013, Hartford, CT, August 2013.

 

 Patents Awarded:

                Title                                                                                                    Number                 Year

1)             Cabinet for Electronic Equipment                                                         7,643,291                2010

2)              Shunt for Indirectly Heated Bi-Metallic Strip,                                        6,215,379               2001

3)             Molded Magnetic Article                                                                     6,054,210                2000

4)             Finger Controlled Inspection Apparatus                                                6,029,530                2000

5)             Radially- Focused Eddy Current Sensor for Detection of

                Longitudinal Flaws in Metallic Tubes                                                     5,942,894                1999

6)             Finger Controlled Inspection Apparatus                                                5,895,871                1999

7)             Thickness Gauging of Single-Layer Conductive Materials with

                Two-Point Non-Linear Calibration Algorithm                                        5,847,562                1998

8)             Hand-Holdable Eddy Current Probe                                                     5,801,532                1998

9)             Eddy Current Method for Fatigue Testing                                              5,698,977                1997

10)                       Rotating Flux-Focusing Eddy Current Probe for Flaw Detection            5,648,721                1997

11)           Flux Focusing Eddy Current Probe                                                       5,617,024                1997

12)           High Speed Thin Plate Fatigue Crack Monitor                                      5,493,511                1996